Single Wide – Manual Drive, Double Wide – Manual Drive
coarse, fine, medium
$1,040.00 – $1,458.00
The Strauch 200 Series mid-range chain drive drum carder is made from solid ash with a Watco Danish oil finish and as with all Strauch drum carders comes standard with the brush attachment. The three working tools (Batt picker, doffer brush, dabber brush) are included with each carder.
The 200 Series mid-range drum carders are the only series that comes with a choice of carding cloth for the large drum: fine, medium, and coarse.
For those with specialized carding needs, there are two coarser styles of card cloth available for the carding drum (the large drum). All cloth uses 3/8″ long plated steel wire in a tough rubberized cloth backing. The price for either of these two carders is the same as the DC205:
The 200 Series uses a smaller sprocket yielding a turning ratio of 4:1. Because of this the frame height is 4″ and therefore this carder has to be at the edge of the work surface, allowing the crank to clear the table.
Also, due the frame height, a motorized version is NOT available. If you are planning in the future on having a motorized carder, consider the finest. It can be upgraded at a later time.
Table clamps and Teasing Tool are available separately.
For those who need a larger production size machine, all three models of the 200 Series mid-range drum carders are available as doublewides. These models have drums twice as wide as their singlewide counterparts.
Other than size, the 200 Series doublewides have the identical features and benefits as the singlewide versions.
As with the singlewide, because of the four inch frame height, a motorized Series 200 doublewide is NOT available.